How to Select the Right CCS A Steel Plate for Your Shipbuilding Project

Mar 27, 2026

Leave a message

CCS-A-shipbuilding-steel-plate-MTC.pdf

What is the difference between marine steel plate ccs-a and ordinary Q235-B steel plate?

For shipbuilders and marine engineers, selecting the right steel plate is not just about material properties-it's about compliance, safety, and project efficiency. Among the various marine steel grades, CCS A shipbuilding steel plate stands as the most widely used grade for hull structures.

  Content
Standard CCS "Materials and Welding Specifications"
Grade Grade A
Definition Medium-strength shipbuilding structural steel, suitable for structural components such as ship hulls, decks, and bulkheads.
Yield strength ≥235 MPa
Tensile strength 400–520 MPa
Elongation ≥22%
Impact toughness 0°C,≥27J
 
Advantages
 

 

ccs a steel plate ship structure guide
Good cold bending performance and welding performance
CCS A steel plate applications in ship structure
Through the CCS factory's approval, the ship inspection certificate is provided.
CCS A steel plate certification process
It can be applied to key parts such as the main structure of the hull, superstructure, and hatch covers.precision parts processing line

 

Correspondence Table of Ship Structural Parts and Steel Plate Grades

Part Common steel grade levels Thickness range Selection criteria
Bottom Plating CCS D, CCS E, DH32, DH36 20–50 mm To withstand the maximum total longitudinal bending stress, high toughness and high strength are required.
Side Shell CCS D, DH32, DH36 15–35 mm For withstanding water pressure and wave impact, the bilge area demands even higher standards.
Main Deck CCS D, AH32, AH36 12–32 mm For withstanding deck loads and total longitudinal stresses, the opening areas need to be strengthened.
Hatch Coaming CCS D, DH32 20–40 mm For withstanding loading and unloading impacts, higher strength and wear resistance are needed.
Inner Bottom CCS B, CCS D 10–20 mm The double bottom structure withstands cargo loads.
Longitudinal Bulkhead CCS A, CCS B 8–20 mm The longitudinal strength components are the key structures of oil tankers and bulk carriers.
Transverse Bulkhead CCS A, CCS B 8–18 mm Water-tight compartments withstand liquid impacts.
Superstructure CCS A 4–12 mm The bridge, crew cabins, etc., have smaller loads.
Accommodation Bulkhead CCS A 4–8 mm Non-water-tight, internal partitions.
Bulwark CCS A 6–10 mm Deck edge protection structures.

 

our teams

why choose us?

 

 We promise to provide genuine and verifiable factory certification certificates from the China Classification Society (CCS A steel) and product inspection certificates along with the goods. This is a crucial requirement for the shipyard's warehouse acceptance process.

 Common specifications (CCS A 6-40mm) are in ample supply and can be cut to any length as per customer requirements. This feature helps shipyards reduce waste from leftover materials and lower procurement costs.

 Based on the size of the order and the history of cooperation, we can offer competitive payment terms to help the shipyard optimize its cash flow.

one-stop solution

professional team

high quality

 

How To Cooperate With Us?

Choose YUXIN steel group, and what you purchase is not merely the steel plates, but also a complete warranty system and a sense of responsibility.

Our address

Tianjin, China

Phone Number

(86)-15937221771(WeChat)

(86)-15837212056(WhatsApp)

E-mail

info@chinasteelcompany.com

ccs a ship plate hull construction

FAQ

 

 

CCS A ship steel plate

01.How are the names of the ship plates determined? For example, what does CCS A mean?

CCS: Indicates that the certification body is the China Classification Society.
A: Indicates that the strength level is of general strength. The general strength steel plates are divided into four grades: A, B, D, and E. The main difference lies in the test temperature for impact toughness (grade A at 0°C, grade B at 20°C, grade D at -20°C, and grade E at -40°C).

02.When purchasing the ship plates, what documents can you provide?

The classification society certification certificate, usually referred to as the Mill Certificate or the EN 10204 3.2 certificate.
 The certificate must bear the official seal of the classification society and the signature of the surveyor.
 Traceability: The furnace number and batch number on the certificate must be consistent with the physical markings on the steel plate.
 Data: It must include actual measured data such as chemical composition, mechanical properties (yield, tensile strength, impact value), etc.

03.What is the minimum order quantity?

We support flexible order quantities. For ready-made products, an order of 5 tons is required; for custom rolled products, an order of 20 tons (one furnace batch) is usually necessary. New customers can place a trial order first.

04.Can you provide cutting and processing services?

OK. We offer pre-processing services such as CNC cutting, beveling, and drilling. We will process according to your drawings. Once the materials arrive at the factory, they can be assembled and welded directly, helping you shorten the shipbuilding cycle.

 

modular-1
China one-stop steel processing procurement

Through years of understanding and precipitation of steel, Yuxin Group has now become a mature steel processing and manufacturer, providing various products for many construction companies and steel structure companies around the world. Thanks to Yuxin Group's professionalism and integrity, it has become a world-renowned enterprise.

Send Inquiry
Quality inspection
Yuxin Group always adhere to the integrity of management, accept the testing of all departments.
contact us